[IAH10D Style] ATOTO S8 Gen2 Premium 10.1 Inch Android Car Stereo(This model can't be shipped to North American area.)

  • $585.00
  • Save $10
Shipping calculated at checkout.


This model can't be shipped to North American area. Users from North American area can go check for alternative listings.

  • S8 (Gen2) is the 2nd generation of ATOTO S8 Android car stereos. Its Soc applies a 12nm manufacturing process (higher efficiency, lower consumption), ARM Cortext Octa-Core processor (High performance), and the latest ATOTO AICE UI 11.0 (deep customization on Android Q). New ATOTO S8 can bring confidence and satisfaction under various operations. 3 options are available for internet access - Wi-Fi hotspot, Bluetooth & USB Tethering (Traditional Android car stereos only have Wi-Fi option).
  • Speed Compensated Volume Control (SCVC)-Automatically adjusting S8's system volume as the vehicle speed changes to compensate for the road&wind noise. Users can put memorable photos in the specified gallery folder and let them play automatically on S8's HD screen with only a tap. S8 enables 6 touch gestures supporting a 2-fingers/3-fingers tap to enter the multi-task menu quickly, switch between preset 9 EQ modes, adjust the screen brightness, etc., which improve operation safety during driving.
  • Dual Bluetooth (BT1 5.0 & BT2 4.1) chips allow S8 to have multi-connections with phone and other BT devices meanwhile. BT2 supports Bluetooth tethering network and BLE connection. BT1 comes with Qualcomm aptX HD codec - Enhanced codec supports 24-bit music quality over BT,you can hear even the smallest details in music (phone needs to support BT aptX HD codec). Built-in phone integration link supports wired Android Auto & CarPlay, and wireless CarPlay is supported since September 1st, 2021.
  • This model works with ATOTO AC-HD03LR cameras (not included) to have an HD Virtual Surround-View (VSV) and Live Rear-View (LRV) display - Access rearview even if your vehicle is moving ahead. This could remove obstructions caused by headrests and the vehicle's rear pillars, increasing the field of view. It also applies the latest 10.1-inch 1280x720 QLED display, a type of quantum film LED-backlit LCD technology that can greatly improve the color effect (Enhanced R.G.B display).
  • S-S8G2114PM applies IAH10D style (Integrated and Adaptive Head-unit of 10.1-inch Display), working with YO-FUNG vehicle-specific Installation Dash Kit (wiring harness, data interface, mounting kit). Over 200 models have the opportunity to complete the OEM factory-style installation. For few vehicles, the edge of the 10.1-inch display part may block the air vent, emergency switch, or other buttons located around, resulting in inconvenience. Continuous system firmware update is available from ATOTO.
ATOTO S8 Premium

Product Information

 

  • Product Version: S8 Premium (Gen2); Model No: S-S8G2114PM(3GB/32GB); Mounting style: IAH10D (Integrated and Adaptive Headunit of 10.1-inch Display);
  • System Information. SoC Chip: UNISOC 7862 ARM Cortex Octa-Core (up to 1.8GHz) CPU with ARM Mali-G52 MP2 GPU, advanced 12nm manufacturing process. System Version: ATOTO AICE UI 11.0, which is developed & customized based on Android Q(10.0); System Language: English, German, French, Italian, Spanish, Portuguese, Japanese, Russian, Arabic, Polish, Korean, Dutch, Thai, Turkish, Ukrainian, Hebrew, Greek, Hungarian, Indonesian, Vietnamese and Chinese.
  • DSP / Pre-Amplifier: Built-in Digital Signal Processor allows you to set precise equalization, signal delay, bass boost, bass filter. Preset 9 EQ Modes, and 32 adjustable frequency bands (16 bands for front and 16 for rear). Built-in Max 4*49W BTL Amplifier with RMS 4*29W (Vcc=14.4v, THD=10%);
  • Bluetooth & Radio Tuner: Dual Bluetooth (BT1 5.0 & BT2 4.1). Bluetooth1 is Qualcomm Bluetooth 5.0 with aptX & aptX HD codec (SBC & AAC are also supported), and it supports HFP/HSP/A2DP/AVRCP/PBAP protocols; Radio tuner: Built-in high sensitivity FM/AM radio tuner with RDS/RBDS feature (and the radio station name will be displayed if available);
  • Display: Full HD 10.1inch 1280*720 5-Touch Capacitive Touchscreen with 600cd/m2 latest QLED screen;
  • GPS/Navigation: Built-in GPS Receiver module with an external GPS antenna and Google Maps app is installed as the default GPS map.Users may need to download offline map data for a specific area for offline navigation if preferred. Other maps/navigation apps (Waze, Tomtom, HereWeGo) from Google Play Store can also be installed;
  • Phone Mirroring & Phone Integration Link: Phone Mirroring - EasyConnect app pre-installed, and it supports working with the latest iOS & Android devices (system firmware update may be required). Two options (USB /WiFi) are all available for connecting to Android smartphone and iPhone; Phone Integration Link (CarPlay & Android Auto Connection) - It seamlessly integrates your smartphone (iPhone & Android) with the S8's built-in display and controls via USB and allow you to make phone calls, access your music, send and receive messages, get directions.
  • Some Other features: Fast System Boot - Start the car & access system within 2 seconds; Split Screen Display - Run a navigation map and another app (such as Youtube) on the same screen simultaneously; Digital Photo Frame option - Users can put memorable photos in the specified Gallery Folder and let them autoplay on S8's HD big screen with only a tap (or a hand gesture); Speed Compensated Volume Control (SCVC)- When you increased in speed the headunit volume increased a certain percentage and when you slowed down, the volume dropped. This is to compensate for road noise; USB network tethering - sharing your phone data with S8 headunit via USB connection (EasyConnect app); Live RearView (LRV) - Now you can access rearview even if your vehicle in moving ahead. This could remove obstructions of passengers, headrests and the vehicle’s roof and rear pillars, increasing field of view and allowing the driver an unimpeded view of the lanes behind and traditional blind-spots

 

Inputs,Outputs & Slots

 

  • AUX Audio(L/R) /Video input; FCAM front camera video input; Rearview camera input (S8 can process 720P HD video signal. So you can connect a specific HD rearview camera to S8 for 720P video display); 4-CH RCA Audio Out (2v) for connecting to factory/aftermarket amplifier; Separate Sub-woof Out (0.8v); For S8 Premium, there is no Optical SPDIF Out, or QC 3.0 Quick Charge interface; To connect to a headrest monitor, you need to get an extra ATOTO USB-to-HDMI or USB-to-RCA video output adaptor(not included)
  • One Micro SD slot - to store media files, and can read up to 512GB storage card; (2 USB) interfaces for data communication, including reading USB Drive (read unlimited external storage devices, including portable SSD) & optional USB devices, and connecting phone for Mirror casting/EasyConnect or Phone Integration Link;

Vehicle Fit:

  • This model has a 10.1inch display and a single-DIN & double-DIN adaptive headunit case. The dimension of its headunit case is 170mm*95mm* 36 mm, and its 10.1in screen dimension is 258 mm x 160 mm. It can be installed in most vehicles that have standard double-DIN dashboard opening. For few vehicles, the edge of the 10.1in display part may block the air vent, emergency switch, or other buttons located around the double-DIN opening, resulting in inconvenience. Be sure yours won't have such a problem, or you can accept it. In addition, it applies IAH10D style (Integrated and Adaptive Head-unit of 10.1-inch Display), working with YO-FUNG vehicle-specific Installation Dash Kit (wiring harness, data interface, mounting kit) for a more integrated & OEM Factory-style look. Over 200 models have the opportunity to complete the OEM factory-style installation.

Notice:

  • Optional parts for working with ATOTO S8 (Gen2) Premium (sold separately): 1. ATOTO S-AC-44P2 1080P On-dash DVR Camera; 2. ATOTO S-AC-44F5 Steering wheel IR Remote; 3.ATOTO S-AC-4450 Bluetooth OBD II scanner /Code Reader; 4. ATOTO S-AC-HD02/S-AC-HD02LR HD Rear-view Camera or S-AC-HD03/S-AC-HD03LR Wide-angle HD rearview camera (for Virtual Surround View); 5. ATOTO S-AC-UTP1 USB TPMS (Tire Pressure Monitoring Sensor); 6. ATOTO Video Output Adaptor (S-AC-AHV68: USB to HDMI adaptor; S-AC-AHV48: USB To RCA adaptor). Some of them must be connected before installation; All optional accessories can be found here:amazon.com/atoto;

More than a car stereo - Install Android Apps, play music online, run online map & get real-time traffic, connect various external devices to expand functions

ATOTO S8 Internet access

Access to the internet and install Android apps from Google Play Store

 

  • Compared with S8 Gen1(manufactured before Jan 2021), S8 Gen2 can provide up to 4 options for internet access. (1). Connect to the phone's hotspot via 2.4Ghz & 5Ghz WiFi; (2). Connect to Phone Bluetooth and enable Bluetooth tethering option, (3). Use Phone data via USB network tethering feature (an exclusive feature from ATOTO. EasyConnect app is required ); (4). Built-in 4G Cellular Modem allows users to insert a SIM card with a data plan for internet access, and this option is only available on selected S8 models (excluding S8 Standard, Premium);
  • Running online maps or streaming music online on Android car stereo do not need high bandwidth(less than200kb/s), Bluetooth tethering connection is capable of dealing with such demand.
  • Compared with WiFi connection, Bluetooth tethering has lower power consumption, so phone battery will last much longer while Bluetooth tethering is enabled;
  • WiFi connection is easier as it requires only one step - enable your phone's WLAN hotspot; Bluetooth connection requires 2 - 3 steps;
  • USB network tethering is new introduced option by ATOTO, and it allows users to share phone data with S8 via USB connection. This could help save phone battery, or even increase slightly; You only need to run the specific EasyConnect application in the background;
  • More than 1000 apps from Google Play Store have been tested installable on ATOTO S8 Series, especially media/entertainment apps and navigation apps in the category of "Auto & Vehicles". Very few app developers may specify devices/system environments that are allowed to install or run their apps, which results in the inability to install or run on an Android car stereo. Netflix is the case, but a specific version of Netflix is pre-installed so that you can still use it on S8;

 

Android Car Stereo is not the equivalent of putting an Android tablet in the vehicle. The ATOTO S8 has lots of inputs and outputs customized for it to work better in vehicle

 

  • Connect to a specific ATOTO USB On dash 1080P DVR camera for recorded video files preview & playback;
  • Connect to a specific ATOTO USB TPMS tire pressure monitor system. When one or more tires are under-inflated, it will pop up a prompt warning on the S8 screen, and even emit a prompt tone as a reminder;
  • Connect to a rearview camera with CVBS & HD video signal out for safe parking;
  • Connect to your Android / iOS smartphone via USB for running iPhone CarPlay / Android Auto feature, which seamlessly integrates your smartphone (iPhone & Android) with the S8's built-in display and allow you to make phone calls, access your music, send and receive messages, get directions;
  • Connect to an OBD II Diagnostic Scanner /Engine Code Reader via Bluetooth; Compared with single Bluetooth, dual Bluetooth makes communication tasks between multiple Bluetooth connections more balanced and stable.
  • Connect to headrest monitors using ATOTO Video Output Adaptor (S-AC-AHV68: USB to HDMI adaptor; S-AC-AHV48: USB To RCA adaptor; Both are sold separately), and what is displayed on S8 can be synchronized to headrest monitors.

 

Dual Bluetooth chips inside, connectable to more Bluetooth-based devices, customized Bluetooth 5.0 w/ aptX HD audio codec and voice assistant interface

ATOTO S8 Bluetooth aptx

 

  • The Bluetooth 1 works as Bluetooth hands-free (call/answer) with A2DP streaming audio feature. Contacts/recent records will be synchronized once the smartphone is connected. Supports "Quick Search" and "Add to Favorites" for quick dialing!
  • Built-in Noise Cancellation Technology helps suppress background noise and echo feedback in a hands-free call. You don't have to yell at the car stereo to talk with the other one.
  • ATOTO S8 Premium (Gen2) applies Qual-comm aptX HD codec, which was designed to answer the growing demand for high-resolution audio. This enhanced codec supports 24-bit music quality over Bluetooth. This means listeners can hear even the smallest details in their music. Even though the average Bluetooth streaming solution is enough for the majority. For these hypercritical people (who are more obsessed with HD audio quality), there is still regret. Now, enjoy wireless HD audio easily with S8;
  • aptX Low Latency audio delivers sound in sync with what’s on-screen, reduces delay, and improves end-to-end speed of the audio transmission (reduce the delay from 120ms to a minimum of 40ms!), resulting in high quality, synchronized sound, so you never miss a beat.
  • The aptX HD feature requires the phone side also to support Bluetooth aptX HD to perform correctly; Users can check this on Qual-comm aptX HD official website: aptx.com/products/atoto-in-car-entertainment-system
  • The Bluetooth 2 not only works as Bluetooth tethering internet but also allows to connect to Bluetooth gamepad(for kids in rear seats), Bluetooth OBD2, Bluetooth TPMS, etc.;
  • Because of dual Bluetooth inside, the system allows user to connect up to 3 devices simultaneously(one for audio, two for data communication).
  • The customized Bluetooth in S8 allows to wake up the phone's voice assistant (Siri, Google Assistant) via Bluetooth connection. So users can use a specific button on the screen, steering wheel or ATOTO S-AC-44F5 wireless remote to send messages, make calls, and control music with your voice. Much safer, much convenient;